Crank for a Power Products AH-61
Posted: Sun Mar 08, 2009 11:13 pm
Does anybody know if a crank for an AH-58 is interchangeable with an AH-61? Or does anyone know where I can Find An AH-61 crank
You can put a 61 crank in a 58 , its not in a drop in deal . the block and piston need to worked over for clearance . Then port timing needs to be looked at , then piston to head clearance has to be set .
That being said its a great improvement .
As far as finding a good 61 crank ,,,,,, If you find a line on some I would take a few .
Brian