spark plugs
Posted: Sat Aug 01, 2009 7:41 pm
What Plug should I be using when running Alky. I remember Rob mentioned a hotter plug at new castle. By the way-- Rob thanks again for your help with Blake's carb.
Autolite 411 is a replacement for a A901 & AE901. Watch the reach so you don't hit the ground electrode with the piston.
If you are using to many plugs go up in heat. Watch the plug insulator so it don't get so hot it bubbles the ceramic.
PS. I think I use most of my plugs up when I flush my engines. If I was smart I would put a HOT plug in to flush to save my good plugs.