Page 1 of 1
Power Products Stroke?
Posted: Sat Jul 24, 2010 3:29 pm
by vince hughes
What be the 58 and 61 strokes? Im getting ready to put the little red thing on ebay, and want to list accurately. Thanks.
Re: Power Products Stroke?
Posted: Sat Jul 24, 2010 3:44 pm
by ted johnson
Vince, the '58 stroke be 1.680, but I can't find a listing on the '61. Hank Rotroff might know. Call me at 505 869-6233 and I'll give you his phone number. Ted
Re: Power Products Stroke?
Posted: Sat Jul 24, 2010 5:30 pm
by Mike Reller
The AH 58 and AH 82, both have the same stroke, so it may be safe to guess that the AH 61, is the same. Got this from MacBobs web site.
Re: Power Products Stroke?
Posted: Sat Jul 24, 2010 5:39 pm
by ted johnson
Mike, I don't think that's the case. I think the '58 and '61 have the same 2.090 bore, meaning the '61 has a longer stroke. The case on the '61 only is relieved for the rod bolts. I'm waiting for Hank Rotroff to call me back on the '61. Ted
Re: Power Products Stroke?
Posted: Sat Jul 24, 2010 6:24 pm
by ted johnson
Got the skinny from Hank: AH-61 stroke is 1.769. Later! Ted
Re: Power Products Stroke?
Posted: Sat Jul 24, 2010 11:23 pm
by vince hughes
Thanks Brothers! Hank called this afternoon with the info (dont remember the numbers right now, left down at shop) but 61 is about .090 longer than 58. Motor is nice, and on ebay. Money will be going to the poor doctors in my area. They have not yet heard that obama is paying for this stuff. ?wtf