Page 1 of 1

35 Chain

Posted: Thu Jul 05, 2012 12:09 am
by dean kanocz
Looking for ideas on good 35 chain and where to buy it .Thanks for any help.

Re: 35 Chain

Posted: Thu Jul 05, 2012 6:26 am
by Rob Voska
Depends on what clutch drum you run. Modern space chain is to wide for some drums so be careful but EK is a good brand name. For regular narrow chain I use Dimond order it in 10' rolls from Bearing distributors.

Re: 35 Chain

Posted: Thu Jul 05, 2012 8:22 pm
by dean kanocz
Rob,
I am running a rev grip on a 91 mc.Sounds like I should use the diamond chain?
Thanks Dean

Re: 35 Chain

Posted: Thu Jul 05, 2012 9:07 pm
by Rob Voska
I think EK will work on a Horstman but not 100% sure. I'm sure someone knows HELP. I usually run Max Torque.

Re: 35 Chain

Posted: Thu Jul 05, 2012 9:29 pm
by George Sellon
Dean, if it's an outboard clutch the space chain is fine. With the inboard Rev Grip there is interference with the pto bearing boss, at least on 91b1's. The clutch just sets in to far and the extra width of the chain will rub but only for a few seconds :oops: