rearenginekarts.com

Posted: **Mon Dec 13, 2010 3:47 am**

Hi Guys-

I'm looking for a set of 58699A rings for Mc-70 std or the 58353 rings for same size bore Mac chainsaw. thanks much!

Posted: **Mon Dec 13, 2010 6:20 pm**

Jacob..
I used stock bore 101AA rings and cut them down.
I left .065" gap
My engine runs Super, lots of bottom end and mid range.
And the compression is really great.
If you can not find any, this is a fix.
Good Luck
Rick

rearenginekarts.com

Need Mac rings Mc-70 std.

Need Mac rings Mc-70 std.

Re: Need Mac rings Mc-70 std.