Page 1 of 1
Need Mac thin piston rings - 2.125 +.030
Posted: Thu Nov 07, 2013 4:56 pm
by Terry Sullivan
Who has thin rings for the early Mac pistons - 2.125?
I have a few STD, but really need .030
Re: Need Mac thin piston rings - 2.125 +.030
Posted: Fri Nov 08, 2013 2:42 am
by steveohara
Terry,
A set of standard rings from any of the 100cc model engines will work with just a small trim of the ends.
Stock bore on the 7,8,9,30,40,45,90, 91 and after are all 2.165
If they are a little used that is even better.
If you can't find any let me know and I'll dig some nice used ones out of my inventory.
Steve O'Hara
Re: Need Mac thin piston rings - 2.125 +.030
Posted: Fri Nov 08, 2013 10:40 am
by l brown
Terry - Send me a PM I think I can fix you up.
Larry Brown
Re: Need Mac thin piston rings - 2.125 +.030
Posted: Sun Nov 10, 2013 6:51 pm
by Terry Sullivan
Steve,
Thanks - I'm gonna try hard to get the real thing. May have to take a suggestion to check with Otto's - he makes rings!
Terry
Re: Need Mac thin piston rings - 2.125 +.030
Posted: Sun Nov 10, 2013 6:57 pm
by Terry Sullivan
Larry,
Let me know if you got my PM. Not sure it went out
Terry